Siemens Simotics S-1FS2 line of servomotors, designed for the clean condition requirements of the food and beverage, and other process industries. Offered in power ratings from 0.45–2kW (0.60–2.68 hp) with torque from 3.1–14 Nm (2.28–10.32 ft-lbs.). Housings of 1.4404 (AISI 316/316L) stainless steel, EPDM seals and bearing grease with NSF H1 approval.
Added features are high dynamics due to low inherent inertia plus high overload capacity for use in pick-and-place applications, and precise movement of heavy loads. One cable connection is provided. The standard absolute encoder is 22-bit multi-turn.
Simotics S-1FS2 motors are suitable for clean-in-place processes and for use with all commercially available cleaning agents used with washdown motors.
Options include a holding brake, stainless steel shaft with or without feather key, cable tail for direct drive connection and a motion connect coupling.
Motors are designed for the 3-A (U.S.) and EHEDG (Euro) requirements of the food and beverage industries. Simotics S-1FS2 is compatible with the Sinamics S210 drive system.
Next Sulzer Reduces Energy Costs with Hydraulic Power Recovery Turbines
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
