DIY kit produces vertical tillage unit
This vertical tillage conversion kit bolts on to the C-shank of chisel plows. Dual seals on each side of the housing keep in the 90-weight gear oil that lubricates duel Timken tapered bearings. | Robin Booker photo
REGINA — Take that old cultivator and give it new life as a vertical tillage tool.
“We had a customer who had to use a chainsaw to cut down the trees growing through the chisel plow they wanted to convert,” said Dean Gaber of Gaber Distributing.
The oil bath bearing unit, which has two coulter blade discs on each side, bolts into where the shovels normally attach on a chisel plow.
“This fits all chisel plow shanks with 2 1/4 or 2 1/2 inch hole spacing,” said Gaber.
“Chisel plows are 12 inch spacing, and with our bearing the blades are at six inch spacing, so you get even cutting of the residue on the soil surface.”
The oil bath bearing unit has Timken tapered bearings and dual seals on each side of the housing. One seal keeps the dirt out and the other keeps the oil in, which Gaber said helps make the system dependable.
“Other units on the market have grease nipples, and the biggest problem is over-greasing, which damages the seal, and then you have a early bearing failure,” he said. “This unit with the 90 (weight) gear oil eliminates that problem.”
The coulters point directly forward. The system is designed to run at 12 m.p.h.
Vertical tillage has gained in popularity because it often manages crop residue better than a heavy harrow, but it leaves more soil structure in place compared to a heavy disc or cultivator.
However, the cost of a new vertical tillage implement, which can be much more than $100,000, is hard to justify for some growers, especially if they only really need it on a fraction of their acres every year.
Gaber’s vertical tillage conversion kit, which comes complete with bearing housing and coulters, retails at $346.87 per run.
“A 30-foot (chisel plow), you can convert for about $10,000,” he said.
“So for someone looking for a lower cost vertical tillage unit, we will cut the chaff to prevent straw hanging up on air seeding shanks. This is a very economical way to go.”
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Next ETEL Introduces the New XYZ3TH Motion System With VULCANO XY
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
