We are looking for AKASAKA DIESEL Engine complete.
type: E28BKFD.
940ps, 350rpm.

Buy:  bearing 32016 X/Q -4pcs.

Kindly share a quotation for the crankshaft.
MAKE & MODEL: YANMAR 6EY18AL
REQ: CRANKSHAFT
RPM: 900

Wanted for Wartsila 24 Piston pin part no 113402 - 8 pcs.

We buy a rolling mill-line for rolling reinforcement, it is possible to use in good working condition the productivity is 15-25 tons an hour, we will consider all options Phone for communication.

Buy: bearing 67787-sa/67720CB-2pcs.

Please let us know the availability of the Below spares.

Good morning,

Please provide a quotation for the following items:

Neoprene Compound Requirements:
a) Hardness Shore per IRAM 113-003
b) Tensile strength per IRAM 113-004
c) Elongation at break per IRAM 113-004

Behavior under accelerated aging:
Heating in oven at 100°C for 70 hours.
a) Variation in Shore hardness per IRAM 113-003/005
b) Variation in tensile strength per IRAM 113-005
c) Change in elongation at break per IRAM 113-004

Compression set:
After 24 hours at 100°C per IRAM 113-010-MET.B

Ozone resistance:
For a concentration of 1 ppm in air, with 20% strain for 100 hours at 38°C ±1°C per IRAM 113-025

Brittleness:
At -40°C per IRAM 113-013

Oil aging:
For 72 hours at 100°C per IRAM 113-012

Vulcanized bond requirements:
The minimum adhesion strength between rubber and steel shall be verified according to IRAM 113-017-A.

Steel plate requirements:
Corrosion: Steel plates shall be properly treated so that, when tested according to IRAM 121 for 36 hours in a salt spray chamber, no visible signs of oxidation are present.
Strength: The steel type shall correspond to quality SAE 1020 or F24.

Please include in your quotation a testing plan, detailing the type and number of tests to be carried out by a certified laboratory, in order to verify the established requirements.

QUOTATION SHOULD BE CIF BUENOS AIRES, ARGENTINA.

I look forward to your response.

Buy: Bearing GE40ES-8pcs.

Dear Sir,

Hope you are Fine.

One of our customer has requirement of 

If you have any machine,

Please send us Pictures along with full Technical Specification and Best Price of the same

Also if you want to offer us any other machines, please let us know.

Hope to hear soon and have a healthy business relationship with you.

REGARDS