We are in need of a crankshaft for a Ruston 12RKCZ engine.
The crankshaft should be in good working condition.

Kindly share a quotation for the crankshaft.
MAKE & MODEL: YANMAR 6EY18AL
REQ: CRANKSHAFT
RPM: 900

I need the spring machine for 1 pcs. The machine can work 0.2mm at 3.5 mm OD . If you can supply ,please let us know. 

Looking for  the following 
NK14/16 needle roller bearing Chinese origin as well as IKO copy brand 
200 nos 
E15 brass cage 200 nos Chinese origin as well as NSK copy brand

We have a requirement of Complete Engine Model No. WH Allen S12D.
Request please advise the availability and send the photographs of the name plate and the engine from different angles.
We have a requirement of Crankshaft for MAN Diesel Engine L16/24.
We request to you please advise the availability.
Kind Regards

Wanted for Wartsila 24 Piston pin part no 113402 - 8 pcs.

We buy a rolling mill-line for rolling reinforcement, it is possible to use in good working condition the productivity is 15-25 tons an hour, we will consider all options Phone for communication.

Buy: bearing 67787-sa/67720CB-2pcs.

Hello ,we need following bearings. If you can supply, please send quotation to us.

980811NT Forklift Bearing 55x119x34mm    100pcs

Please let us know the availability of the Below spares.

Good morning,

Please provide a quotation for the following items:

Neoprene Compound Requirements:
a) Hardness Shore per IRAM 113-003
b) Tensile strength per IRAM 113-004
c) Elongation at break per IRAM 113-004

Behavior under accelerated aging:
Heating in oven at 100°C for 70 hours.
a) Variation in Shore hardness per IRAM 113-003/005
b) Variation in tensile strength per IRAM 113-005
c) Change in elongation at break per IRAM 113-004

Compression set:
After 24 hours at 100°C per IRAM 113-010-MET.B

Ozone resistance:
For a concentration of 1 ppm in air, with 20% strain for 100 hours at 38°C ±1°C per IRAM 113-025

Brittleness:
At -40°C per IRAM 113-013

Oil aging:
For 72 hours at 100°C per IRAM 113-012

Vulcanized bond requirements:
The minimum adhesion strength between rubber and steel shall be verified according to IRAM 113-017-A.

Steel plate requirements:
Corrosion: Steel plates shall be properly treated so that, when tested according to IRAM 121 for 36 hours in a salt spray chamber, no visible signs of oxidation are present.
Strength: The steel type shall correspond to quality SAE 1020 or F24.

Please include in your quotation a testing plan, detailing the type and number of tests to be carried out by a certified laboratory, in order to verify the established requirements.

QUOTATION SHOULD BE CIF BUENOS AIRES, ARGENTINA.

I look forward to your response.

Buy: Bearing GE40ES-8pcs.

Buy bearing 8296 - 1 pc.

Buy bearing 313YU2T--100pcs.

Dear Sir/Madam,
 

Please provide a price quote below for attached bearing number. Following are part of numbers we need. Please download complete PDF attachment.

SD 3144 * 4
SD 3134 * 4
H 3144 * 4
H 3134 * 4
22318 CA C3 * 20
OH 3160 * 4

23184 CJ C3 W33 * 4