Goldwind GW93/1500 Ultra-Low Wind Speed Turbine Obtains CGC Certificate
Resource from: CBCC Likes:269
Oct 15,2012
Xinjiang Goldwind Science & Technology Co., Ltd. ("Goldwind") announced that its ultra-low wind speed series GW93/1500 Permanent Magnet Direct-Drive (PMDD) turbine was awarded an accreditation certificate by the China General Certification Center (CGC), the mainland’s leading accreditation institution. Which further affirms GW93/1500now meets the domestic wind industry accreditation and national safety standard requirements.
The GW93/1500 ultra-low wind speed PMDD turbine has a 93-meter rotor diameter with a rated capacity of 1500kW. It is designed for IEC Class S wind resource areas where the annual average wind speed is lower than 6.5 m/s. This wind turbine boasts the industry’s largest rotor diameter along with the highest power generation efficiency plus lower cost of energy compared to other same rated capacity turbine models in China. The GW93/1500 series can generate more than 2,000 standard hours of power per year based on an annual average wind speed of 5.5 m/s (assuming a standard air density and Rayleigh distribution).
During the first half of this year, the Group installed a prototype of this turbine in Zhucheng, Shandong province. Based on operational field data, the turbine me tall the design requirements and was more efficient than expected especially under ultra-low wind speed conditions. The turbine performed with an average availability rate of over 98.5%.According to the latest test figures, with wind speed of 5.5 m/s, the GW93/1500 series can produce8.97% more power on average than GW87/1500 series turbines (designed for IEC III class) under the same conditions.
Goldwind’s GW93/1500 PMDD turbines use a permanent magnet generator and full-power converter with grid friendly characteristics. These units not only comply fully with all accreditation requirements and national safety standards but also national grid connection requirements while achieving zero voltage ride-through standards.
Ultra-low wind speed areas have annual average speeds of 5.5 m/s to 6.5 m/s. As wind power technology improves, low wind speed and ultra-low wind speed areas have greater potential for successful utilisation. There are also many ultra-low wind speed areas in close proximity to urban centers with strong power demand and grid capacity.
Goldwind seeks to maximise value for its customers. Leveraging its strong global R&D platform and innovative technologies, the Group has developed various customized wind turbine series to accommodate diverse operating environments. In addition to the ultra-low wind speed series, Goldwind also offers low wind speed, high altitude, low temperature, high temperature, offshore and intertidal PMDD series models. The Group has used these specialized turbine units in several overseas projects, including a high altitude project in Ecuador, a low wind speed project each in Chile and Thailand, a high temperature project in Pakistan and a low temperature project in Minnesota, USA.
Customers from around the world have come to recognize and appreciate the many advantages associated with Goldwind’s PMDD wind turbines. These include low maintenance requirements, strong low voltage ride-through capability, high availability rates, and high power generation efficiency.
###
About Goldwind
Xinjiang Goldwind Science & Technology Co., Ltd. (Goldwind) is the largest manufacturer of wind turbines in China, and among largest globally. With strong R&D capabilities, the company is the world’s largest manufacturer of Permanent Magnet Direct-Drive (PMDD) wind turbines, representing the industry’s next generation technology. Goldwind is listed on both the Shenzhen Stock Exchange (Stock Code: 002202) and the Hong Kong Stock Exchange (Stock Code: 2208).
As of December 31, 2011, Goldwind’s accumulated installation capacity of wind turbines reached over 12 GW, including 10GW of PMDD turbines, equivalent to 9.6 million tons of coal saved per year, 23.94 million tons of carbon emissions reduced per year, or 13.11 million cubic meters of newly planted forest.
For more information, please visit www.goldwindglobal.com.
(CBCC)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Luoyang Longda Bearing Co., Ltd Exhibited at 2012 Shanghai International Bearing Exhibition with Self-developed Products
Next Baosteel and Maersk Group Sign Global Steel product Procurement Strategic Cooperation Agreement
Next Baosteel and Maersk Group Sign Global Steel product Procurement Strategic Cooperation Agreement
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
