Polyurethane seal from Freudenberg-NOK Sealing Technologies replaces PTFE seals in hydraulic piston accumulators
Resource from: PRNewswire Likes:185
Feb 17,2014
Hydratech Industries, a leading provider of solutions for wind power facilities and hydraulic systems, is relying on a polyurethane sealing solution from Freudenberg-NOK Sealing Technologies for its new hydraulic accumulator. Test comparisons with other products have shown that Freudenberg-NOK's SIMKO 300 seal ring offers distinct advantages over frequently used polytetrafluorethylene (PTFE) seals with regard to operating life, form stability and sealing characteristics.
The durability of sealing rings in piston accumulators is a crucial parameter for operating life. For this reason, piston accumulators undergo accelerated load tests at the Hydratech test center in Sikeborg, Denmark that simulate 20 years of service life. During the testing process, the behavior of the seals under pressures greater than 200 bar and temperatures ranging between -104 degrees to +140 degrees F is measured – conditions that exceed actual stresses.
Based on its form stability, extreme hardness and low abrasion, Hydratech now uses the SIMKO 300 from Freudenberg-NOK. The sealing solution "fully meets our expectations and is impressive due to its long service life," said Jimmi Wenderby, Hydratech research and development manager.
Most sealing systems in piston accumulators work with two seals, one for oil and another for gas. This leads to increased wear due to the extreme load, especially in PTFE seals. By contrast, the SIMKO 300 is a single seal (consisting of a seal ring and a pressure ring) and is made of polyurethane. Polyurethane's hardness grade of 98 Shore A corresponds to that of PTFE but is much more robust. Its susceptibility to potential surface damage during installation is also lower. The pressure ring creating the necessary pre-tension is made of an elastomer.
The SIMKO 300 seal's high form stability, its surface firmness and its long operating life make it especially appealing for use in hydraulic pitch controllers in wind power facilities. They are an important component of the security technology in wind power facilities, as the piston accumulator must not merely function reliably under extreme weather conditions but also withstand the high differential pressures that are also produced. The accumulator must be able to operate leak-free over very long periods of time.
The SIMKO 300 is a cost-effective and extremely reliable solution for use in piston accumulators, and it provides a long service life for the wind power station due to its outstanding sealing qualities.
About Freudenberg-NOK Sealing Technologies
Freudenberg-NOK Sealing Technologies is the Americas joint venture between Freudenberg and Co. in Germany and NOK Corp. in Japan. Freudenberg-NOK is a leading producer – through its Automotive, Merkel, Process Seals and Simrit sales channels – of advanced sealing technologies for a variety of markets including: aerospace; agriculture; appliance; automotive; construction; diesel engine; energy; food and beverage; heavy industry; and pharmaceutical.
Founded in 1989 under the legal name Freudenberg-NOK General Partnership, Freudenberg-NOK is headquartered in Plymouth, Mich. and operates more than 20 facilities across the Americas. For additional information, please visit www.fnst.com.
(PRNewswire)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
