Your location:  Home  >  Bearing News  >  World Bearing News
<<  Back

What are the noise caused by bearing application problems and their countermeasures

Resource from:  CBCC Likes:42
Jun 27,2023

What are the noise caused by bearing application problems and their countermeasures

1 ra8008.jpg

Bearing application problems can lead to various noise issues. Here are some common noise sources caused by bearing problems and potential countermeasures:

Abnormal Vibration Noise:

1.Cause: Excessive clearance, misalignment, or imbalance in the bearing assembly.

2.Countermeasures: Ensure proper bearing installation and alignment. Use precision instruments to measure and adjust bearing clearances. Balance rotating components to minimize vibrations.

Rolling Element Noise:

1.Cause: Insufficient lubrication, contamination, or damage to the rolling elements.

2.Countermeasures: Maintain proper lubrication by using the correct type and quantity of lubricant. Regularly clean bearings and protect them from contamination. Replace damaged or worn rolling elements promptly.

Cage Noise:

1.Cause: Improper clearance between rolling elements and the cage, misalignment, or damage to the cage.

2.Countermeasures: Verify proper bearing fit and clearance. Align the bearing assembly accurately. Replace damaged or worn-out cages.

Friction Noise:

1.Cause: Insufficient lubrication, excessive preload, or improper fit between the bearing and its mating parts.

2.Countermeasures: Ensure adequate lubrication by applying the appropriate lubricant. Adjust preload to the manufacturer's specifications. Verify proper fit and tolerances between the bearing and associated components.

Impact Noise:

1.Cause: Excessive axial or radial loads leading to impacts between rolling elements and raceways.

2.Countermeasures: Evaluate and adjust load distribution to avoid overloading the bearing. Utilize load-carrying equipment appropriately. Consider using bearings with higher load capacities if necessary.

Loose Fit Noise:

1.Cause: Inadequate press fit or clearance between the bearing and its housing or shaft.

2.Countermeasures: Verify the correct bearing fit and ensure proper clearance. Follow manufacturer guidelines for installation and fit tolerances.

Lubrication Noise:

1.Cause: Improper lubrication selection, contamination, or degradation of the lubricant.

2.Countermeasures: Choose the appropriate lubricant based on operating conditions. Regularly inspect and replace lubricants to prevent contamination or degradation. Follow proper lubrication procedures and intervals.

It is important to note that these countermeasures may vary depending on the specific bearing type, application, and manufacturer recommendations. Consulting the bearing manufacturer's guidelines and seeking professional assistance can help in addressing noise issues effectively.

 

Contact


Company:Luoyang EFANT Precision Bearing Manufacturing Co. Ltd


Address:No. 9 Jingjin North Rd, Luoxin Development Zone, 

Xin'an County, Luoyang City, Henan Province 471003, China


Tel:86-379-80887690


export@efindbearing.com


https://www.efindbearing.com

https://www.efindbearing.com/contact-us


(CBCC)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.

BRIEF INTRODUCTION

Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.

Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.

China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.