[Title]: Demand supports

Good morning,

Please provide a quotation for the following items:

Product	Notes	Unit	Quantity
A1 Supports	450x250x55 mm with 5 internal 2 mm steel plates, according to attached drawing	ea	390
Longitudinal Stop TL1	200x100x10+2 mm with 1 external 2 mm steel plate, according to attached drawing	ea	13
Longitudinal Stop TL2	500x100x10+2 mm with 1 external 2 mm steel plate, according to attached drawing	ea	116
Transverse Stop TT2	300x150x10+2 mm with 1 external 2 mm steel plate, according to attached drawing	ea	132

Neoprene Compound Requirements:

a) Hardness Shore per IRAM 113-003

b) Tensile strength per IRAM 113-004

c) Elongation at break per IRAM 113-004

Behavior under accelerated aging:

Heating in oven at 100°C for 70 hours.

a) Variation in Shore hardness per IRAM 113-003/005

b) Variation in tensile strength per IRAM 113-005

c) Change in elongation at break per IRAM 113-004

Compression set:

After 24 hours at 100°C per IRAM 113-010-MET.B

Ozone resistance:

For a concentration of 1 ppm in air, with 20% strain for 100 hours at 38°C ±1°C per IRAM 113-025

Brittleness:

At -40°C per IRAM 113-013

Oil aging:

For 72 hours at 100°C per IRAM 113-012

Vulcanized bond requirements:

The minimum adhesion strength between rubber and steel shall be verified according to IRAM 113-017-A.

Steel plate requirements:

Corrosion: Steel plates shall be properly treated so that, when tested according to IRAM 121 for 36 hours in a salt spray chamber, no visible signs of oxidation are present.

Strength: The steel type shall correspond to quality SAE 1020 or F24.

Please include in your quotation a testing plan, detailing the type and number of tests to be carried out by a certified laboratory, in order to verify the established requirements.

QUOTATION SHOULD BE CIF BUENOS AIRES, ARGENTINA.

I look forward to your response.