Schaeffler (UK) Ltd Offers UK Customers a Rapid Delivery Service for Machined Shafts and Linear Guidance Systems
Resource from: Schaeffler (UK) Ltd Likes:3064
Apr 13,2011
(April 12, 2011)
The Schaeffler Group is one of the world’s leading manufacturers of linear guidance systems and machined shafts. Globally, Schaeffler manufactures in excess of 10km of shafting for customers every day. As John Loonam, Linear Product Specialist at Schaeffler (UK) Ltd states: “The shafting comes off the linear production line in Germany continuously at walking pace, 24 hours a day, seven days a week.”
As a Group, Schaeffler offers one of the most comprehensive ranges of linear guidance products in the world. A wide range of linear shafting is available and can be supplied with or without related linear guides or bearings.
Shafts are available as high precision solid (one-piece), hollow or machined shafts made from quenched and tempered steel to rolling bearing quality.
Solid shafts can be supplied with outside diameters from 4mm up to 80mm with shaft tolerance to H6 (other tolerances are available on request). For mounting, solid shafts can be supplied with radial and axial threaded holes or can be manufactured to suit individual customer specifications.
Shafts made from standard CF53 are induction hardened and ground. Hollow shafts are only available in quenched and tempered steel.
As an alternative to CF53, customers can request solid shafts with corrosion-resistant steels, for example, in X90CrMoV18, which offers surface hardness equivalent to stainless steel. These steels are ideal for food processing applications, medical equipment and semiconductor technology.
Coatings for every application
A variety of coatings can be applied to solid and hollow shafts, including hard chrome plating, Schaeffler’s Corrotect, Protect A and Protect B.
Corrotect is resistant to neutral, organic fluids such as oil, brake fluid and petrol. It is also resistant to aqueous salt solutions in the pH range 5 to 10. Protect A is a thin layer of chromium plating with a pearl structure, which acts as an anti-wear layer even under mixed friction or slippage conditions. Protect B is a thin layer of corrosion-resistant chromium plating covered by a chromium mixed oxide, which supports the lubricant in high temperatures and aggressive environments.
Hollow shafts are available with outside diameters from 12mm up to 80mm, with shaft tolerances of H7. All coatings can be applied to hollow shafts, except X46 and X90.
Solid or hollow shafts can be supplied in lengths up to 6m, although greater lengths can be machined (butt-jointed) to specific customer requirements.
Schaeffler has a large stock of shafts available from its UK Linear Quick-Centre, which is located at the company’s UK manufacturing plant in Llanelli, South Wales. This facility enables Schaeffler to offer UK customers rapid deliveries on linear systems, rails, shafts, cages and carriages, as well as customer-specific machined shafts.
John Loonam comments: “No other manufacturer of linear guides or bearings has a facility like this based in the UK. The Linear Quick-Centre has enabled Schaeffler to reduce UK customer lead times significantly over the past two years, especially on low volume linear products and shafts. It means we can offer customers 48-hour emergency support on cut-to-length shafts. Custom, machined shafts are generally available on 3 to 5 day lead times.”
The Linear Quick Centre can machine shafts up to 6m in length, with diameters between 5mm and 80mm. Monorails can also be machined up to 6m in length. Materials include induction-hardened steel, stainless steel and aluminium support rails.
Loonam continues: “We’ve invested in new machinery and more toolmakers, which gives us a highly-skilled, flexible workforce comprising 26 toolmakers – all apprenticeship-trained. This enables us to meet any customer request for machined shafts and linear components. We have a very well equipped toolroom with CNC machining centres, CNC lathes, CNC cylindrical grinding machines, turret mills, automatic cut-off machines, turret drills, deburring machines, centre lathes and face grinding machines. This enables us to machine complex shafts in-house and manufacture product designs to customer requirements.”
Examples of rapid shaft deliveries from the Linear Quick-Centre include linear shafts with machined flats, grooves, drilled and tapped holes, or shafts manufactured to very close tolerances. Accessories such as mounting blocks, plain bushes, brackets and other fabricated items have also been supplied.
“Typical customer applications,” says Loonam, “include hydraulic rods, spindles for fans and drive shafts. In fact, any industry sector in the UK that requires accurate, hardened, high quality shafting on rapid lead times should contact the Linear Quick-Centre.”
For more information on Schaeffler’s range of shafts and linear guidance systems, please call the Marketing Department on 0121 313 5870 and request a copy of the WF1 catalogue. Alternatively, email info.uk@schaeffler.com
Solid or hollow shafts can be supplied in lengths up to 6m, although greater lengths can be machined (butt-jointed) to specific customer requirements.
Schaeffler has a large stock of shafts available from its UK Linear Quick-Centre, which is located at the company’s UK manufacturing plant in Llanelli, South Wales. This facility enables Schaeffler to offer UK customers rapid deliveries on linear systems, rails, shafts, cages and carriages, as well as customer-specific machined shafts.
John Loonam comments: “No other manufacturer of linear guides or bearings has a facility like this based in the UK. The Linear Quick-Centre has enabled Schaeffler to reduce UK customer lead times significantly over the past two years, especially on low volume linear products and shafts. It means we can offer customers 48-hour emergency support on cut-to-length shafts. Custom, machined shafts are generally available on 3 to 5 day lead times.”
The Linear Quick Centre can machine shafts up to 6m in length, with diameters between 5mm and 80mm. Monorails can also be machined up to 6m in length. Materials include induction-hardened steel, stainless steel and aluminium support rails.
Loonam continues: “We’ve invested in new machinery and more toolmakers, which gives us a highly-skilled, flexible workforce comprising 26 toolmakers – all apprenticeship-trained. This enables us to meet any customer request for machined shafts and linear components. We have a very well equipped toolroom with CNC machining centres, CNC lathes, CNC cylindrical grinding machines, turret mills, automatic cut-off machines, turret drills, deburring machines, centre lathes and face grinding machines. This enables us to machine complex shafts in-house and manufacture product designs to customer requirements.”
Examples of rapid shaft deliveries from the Linear Quick-Centre include linear shafts with machined flats, grooves, drilled and tapped holes, or shafts manufactured to very close tolerances. Accessories such as mounting blocks, plain bushes, brackets and other fabricated items have also been supplied.
“Typical customer applications,” says Loonam, “include hydraulic rods, spindles for fans and drive shafts. In fact, any industry sector in the UK that requires accurate, hardened, high quality shafting on rapid lead times should contact the Linear Quick-Centre.”
For more information on Schaeffler’s range of shafts and linear guidance systems, please call the Marketing Department on 0121 313 5870 and request a copy of the WF1 catalogue. Alternatively, email info.uk@schaeffler.com
(Schaeffler (UK) Ltd)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.
Previous Timken, SAE International Present Innovation Award to Chrysler's Dr. Mircea Gradu
Next SKF Reaches FTSE4Good Requirements for the 10th Year in a Row
Next SKF Reaches FTSE4Good Requirements for the 10th Year in a Row
BRIEF INTRODUCTION
Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.
Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.
China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.
