Your location:  Home  >  Bearing News  >  China Market
<<  Back

Force Analysis of Tapered Roller Bearings

Resource from:  https://www.lbcnbearing.com/ Likes:113
Aug 04,2022
Tapered roller bearings are suitable for radial loads, unidirectional axial loads and combined radial and axial loads. The axial load capacity of tapered roller bearings depends on the contact angle , that is, the angle of the outer ring raceway. The larger the contact angle , the greater the axial load capacity.

Generally, tapered roller bearings are not allowed to have angle error, but the surface of the roller and raceway can be allowed to have an angle error of 2' to 4' after special design. Single row tapered roller bearings Single row tapered roller bearings can withstand axial loads in one direction.
LBCN tapered roller bearing
And can limit the axial displacement of the shaft relative to the bearing seat in one direction. Even under the action of pure radial load, additional axial component force will be generated inside the tapered roller bearing, at this time, an equal amount of reverse force is required to balance it.

Usually two single-row tapered roller bearings of the same structure are used in the two supports face to face or back to back. In order to ensure the good running state of the bearing, the tapered roller bearing, like other ball and roller bearings, must be applied with a certain amount of Minimal load, especially for high speed, high acceleration, or work under conditions with frequent changes in load direction.

Because, under these working conditions, the inertial force of the rollers and cages and the friction in the lubricant will adversely affect the rolling and rotation accuracy of the bearing, and there may be sliding between the rollers and the raceway that is harmful to the bearing. sports.
LBCN tapered roller bearing 30214
The minimum load Fmin required for a tapered roller bearing can be estimated by the following formula: Fmin = 0.02C, where C - basic dynamic load rating, a larger load may be required for start-up at low temperature or in the case of high lubricant viscosity minimum load.

Often, the weight of the bearing support itself, plus the load on the bearing, exceeds the minimum required load. If the minimum load has not been reached, this type of bearing must be subjected to additional radial load, such as axial preload on the bearing to meet the minimum load requirements.

In the use of each product, we are most concerned about the core value of such products and the various factors that affect this core value. For tapered roller bearings, its use efficiency is greatly affected by its force.
(https://www.lbcnbearing.com/)
【CBCC News Statement】
1.The news above mentioned with detailed source are from internet.We are trying our best to assure they are accurate ,timely and safe so as to let bearing users and sellers read more related info.However, it doesn't mean we agree with any point of view referred in above contents and we are not responsible for the authenticity. If you want to publish the news,please note the source and you will be legally responsible for the news published.
2.All news edited and translated by us are specially noted the source"CBCC".
3.For investors,please be cautious for all news.We don't bear any damage brought by late and inaccurate news.
4.If the news we published involves copyright of yours,just let us know.

BRIEF INTRODUCTION

Cnbearing is the No.1 bearing inquiry system and information service in China, dedicated to helping all bearing users and sellers throughout the world.

Cnbearing is supported by China National Bearing Industry Association, whose operation online is charged by China Bearing Unisun Tech. Co., Ltd.

China Bearing Unisun Tech. Co., Ltd owns all the rights. Since 2000, over 3,000 companies have been registered and enjoyed the company' s complete skillful service, which ranking many aspects in bearing industry at home and abroad with the most authority practical devices in China.